How To Root and Install TWRP Recovery On [Panasonic P88] Custom Recovery

Root twrp Recovery for Panasonic P88 is Here, in the article you Will Learn How to Install twrp Recovery and Root Panasonic P88. Rooting is the way to obtain Supersu Right’s on Android Devices, that means after Rooting the Phone You can unlock All features of the Device and you have Full Permission to Play with it. means you can Install custom ROM, Install Custom Mod’s and tweak your phone using various tricks. Rooting also Best way to Save battery because after Rooting you can Disable all Apps In Single Click and also you have Right to Remove

TWRP recovery how to install Panasonic P88 firmware. In this article I will clearly show where to download the firmware on

All you need to know about rooting in Panasonic P88?, how to - HardReset.info

There is an application - SuperUser/SuperSU - which is used for managing those actions, as well as CWM (ClockWorkMod) and TWRP


 Pre-Installed system app so you can Easily Uninstall Non Require System apps. follow below Guide to Install twrp Recovery and Root Panasonic P88.

Note-

1. This is a unique Guide which is work on almost all Asus Devices.

2. Flashing The ROM will erase all your Data with official Rom, So create a backup of your personal data before Flashing, if possible.

3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.

4. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.

5.Follow all steps correctly otherwise it cause bootloop.

6. Must backup NVRAM using this Guide before Doing anything.

Require tools and Files-
.................................................................................
File Name.                                  Download
.................................................................................
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
  TWRP Recovery. 3.2.5             Downloand
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Magisk Manager.                       Downloand
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
My Youtube Channe.                YouTube
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Best My Post Rom And TWRP. Poting Guide
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
1. Custom Rom Poting Gudie. ROM Poting 
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
2.TWRP Recovery Poting Gudie. Recovery
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Croos Rom Poting Gudie. Crops Poting
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••
How to Install twrp Recovery on Panasonic P88-
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••

How to Root Panasonic P88-

Step 1 First of all we need stock boot and Recovery images so take from Stock ROM or Follow this Guide to backup unRooted Stock ROM Here

Step 2. Download adb folder From above and Fastboot driver Installer From above

Step 4. then follow Bellow Instructions, Be Remember Bootloader Must Unlocked

Step 5. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.

Step 6. Run Toolkit exe File then Follow on Screen Instructions to unlock bootloader, create a Rooted boot.img and then Flash this Rooted boot.img

Follow Video guide- Here

Note- if we provide toolkit then Run toolkit exe and follow on Screen instructions.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••
1.My Rooting Guides Momeen Ali developer
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Panasonic P88 Twrp And Rooting

Panasonic P88 rooting with twrp
Hello friends.I am neelakanta
I got a good news for Panasonic P88 users.
I have ported twrp for Panasonic P88.

I have provided a zip file. It contains
Scatter file, twrp file and SuperSU zip file.
You can flash this easily using sp flash tool. Or by adb and fastboot commands.

But you have to unlock your bootloader first. You can find many videos on unlocking bootloader by adb and fast boot commands.

Custom recovery:-
Twrp version 3.0

Bugs:-
Touch and display reversed but you can use it easily.

I will upload a video tutorial soon on how to flash this recovery for Lava.
Please subscribe my YouTube channel ' Neelakanta tech tube ' to get the video tutorial fast.

Note:-
After flashing the twrp . Don't turn on the mobile,first you have to enter into recovery and you have to flash SuperSU zip.

How To Root and Install TWRP Recovery On [Panasonic P90] Custom Recovery

Install TWRP Recovery On [Panasonic P90] Custom Recovery

Root twrp Recovery for  Panasonic P90
 is Here, in the article you Will Learn How to Install twrp Recovery and  Root Panasonic P90 Rooting is the way to obtain Supersu

Rooting is the way to obtain Supersu Right’s on Android Devices, that means after Rooting the Phone You can unlock All features of the Device and you have Full Permission to Play with it. means you can Install custom ROM, Install Custom Mod’s and tweak your phone using various tricks. Rooting also Best way to Save battery because after Rooting you can Disable all Apps In Single Click and also you have Right to Remove

TWRP recovery how to install  Panasonic P90
 firmware. In this article I will clearly show where to download the firmware on

All you need to know about rooting in  Panasonic P90
?, how to - HardReset.info

There is an application - SuperUser/SuperSU - which is used for managing those actions, as well as CWM (ClockWorkMod) and TWRP


 Pre-Installed system app so you can Easily Uninstall Non Require System apps. follow below Guide to Install twrp Recovery and Root  Panasonic P90
.

Note-

1. This is a unique Guide which is work on almost all Asus Devices.

2. Flashing The ROM will erase all your Data with official Rom, So create a backup of your personal data before Flashing, if possible.

3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.

4. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.

5.Follow all steps correctly otherwise it cause bootloop.

6. Must backup NVRAM using this Guide before Doing anything.

Require tools and Files-
.................................................................................
File Name.                                  Download
.................................................................................
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
  TWRP Recovery. 3.2.5             Downloand
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Magisk Manager.                       Downloand
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
My Youtube Channe.                YouTube
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Best My Post Rom And TWRP. Poting Guide
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
1. Custom Rom Poting Gudie. ROM Poting 
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
2.TWRP Recovery Poting Gudie. Recovery
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Croos Rom Poting Gudie. Crops Poting
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
How to Install twrp Recovery on  Panasonic P90 How to Root  Panasonic P90 TWRP.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

How to Root  Panasonic P90
-

Step 1 First of all we need stock boot and Recovery images so take from Stock ROM or Follow this Guide to backup unRooted Stock ROM Here

Step 2. Download adb folder From above and Fastboot driver Installer From above

Step 4. then follow Bellow Instructions, Be Remember Bootloader Must Unlocked

Step 5. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.

Step 6. Run Toolkit exe File then Follow on Screen Instructions to unlock bootloader, create a Rooted boot.img and then Flash this Rooted boot.img

Follow Video guide- Here

Note- if we provide toolkit then Run toolkit exe and follow on Screen instructions.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••
1.My Rooting Guides Momeen Ali developed
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

 Panasonic P90

 Twrp And Rooting

 Panasonic P90
 rooting with twrp
Hello friends.I am neelakanta
I got a good news for  Panasonic P90
 users.
I have ported twrp for  Panasonic P90


I have provided a zip file. It contains
Scatter file, twrp file and SuperSU zip file.
You can flash this easily using sp flash tool. Or by adb and fastboot commands.

But you have to unlock your bootloader first. You can find many videos on unlocking bootloader by adb and fast boot commands.

Custom recovery:-
Twrp version 3.0

Bugs:-
Touch and display reversed but you can use it easily.

I will upload a video tutorial soonh this recovery for .
Please subscribe my YouTube channel ' Neelakanta tech tube ' to get the video tutorial fast.

Note:-
After flashing the twrp . Don't turn on the mobile,first you have to enter into recovery and you have to flash SuperSU zip.

How To Install Twrp 3.2 Recovery & Root Xolo Era 3X - Twrp Custom Recovery

Twrp 3.2 Recovery & Root Xolo Era 3X - Twrp Custom Recovery

How to Install twrp 3.2 Root Xolo Era 3x 4G

Contents

1 Download twrp & Root Xolo Era 3X

1.0.1 Disclaimer:

1.0.2 Download Files:

1.0.3 How to Install twrp Recovery on Xolo Era 3X

1.0.4 How to Root Xolo Era 3X

Download twrp & Root Xolo Era 3X


twrp Recovery Now available for the Xolo Era 3x 4G user Who own Xolo Era 3x 4G Smartphone can Root it using the Below Instructions. The Recovery is Flashable via Both Flash tools and fastboot Method.You can Follow below one to Install twrp on Xolo Era 3x 4G.

Rooting on Xolo Era 3x 4G is Not Easy but it’s not a big Deal everyone can do it if they have Some instructions. So we have Decide to Share Rooting Instructions for You. in the article we are Going to Discuss about the Rooting on Xolo Era 3x 4G. So if you own a Xolo Era 3x 4G Smartphone then this is the Correct place for You Where You Will find a Working Guide to root your Phone.

Now First of All We have To Install a Custom Recovery to Root Xolo Era 3x 4G. So In the Primary Step You need to unlock it’s bootloader and after that You can install Custom Recovery on Xolo Era 3x 4G. and then You Can Root it by Flashing Magisk.zip.

Xolo Era 3x 4G is Run on Mediatek MT6737 SoC along With android 7.0. it Come with 2GB of RAM and 16GB of Storage.

Disclaimer:

Rooting May Void Your Device Warranty.So Make a Backup of Your Data and ROM.

In Some cases Rooting Cause bootloop So Do at own Risk.

Make Sure your Phone at-least 50% Charge to Prevent accidental Shut Down During The Rooting process.

Download Files:

 Twrp 3.2 Dowland Xolo Era 3x 4G

 Magisk. Dowland

YouTube. YouTube

Best Post Custom ROM Poting Gudie

1.Custom ROM Poting Gudig ROM poting Guide

2.Twrp Recovery Poting Guide


Platform tools/adb Fastboot tools

No verity opt Encrypt

How to Install twrp Recovery on Xolo Era 3X

First of all We Need to Setup adb Fastboot tools/Platform tools So Download From above and extract the zip File.

Now Download and Extract recovery.img [Must rename recovery.img] file Inside the adb tools Folder.

Switch off Phone and together Press Volume Down and Power button it Will boot it in fastboot Mod.

Then Connect Phone to PC using the usb cable.

Now open CMD in the adb tools Folder and type below Code.


fastboot devices code...........................



fastboot oem unlock if fail fastboot flashing unlock

fastboot flash recovery recovery.img

How to Root Xolo Era 3X

First of all Download Magisk.zip File From the above and Move it to Device Storage.

Now Switch off Phone and together Press Volume Up and Power button it Will boot your Phone in twrp.

In the twrp Click on backup Button Select Require Partition and Swipe Slider to Create a nandroid backup.

Click on Install Button and Locate Downloaded Magisk.zip File and Then Swipe Slider to Install it.


again Click on Install and then Locate No verity opt encrypt.zip and Swipe Slider to Install it.

Done/ then Reboot System Now. Your Phone Successfully Rooted. Have any Question leave a Comment We will happy to help You..

Install TWRP Recovery On[Gionee X1[One Click Installer] - The Android devices

1.twrp 3.2.1 Recovery Now available for Gionee X1 user who own Gionee X1 Smartphone can root it using te below instructions.

Gionee X1 2014 is one of the most popular budget smartphone launched by Motorola1.twrp 3.2.1 Recovery Now available for Lava Z50 user who own Lava Z50 Smartphone can root it using te below instructions. to hold monopoly in several budding markets. The device comes with commending specs and great looks despite the pocket-friendly price tag. However, rooting the device will make it more powerful as user has the ultimate permissions. Moreover, rooting your device will open the portal to awesomeness as you can now enjoy a wide range of apps which are made specially for rooted Android devices.

So, today we will see how to install TWRP and root  Gionee X1

 2014 with a detailed procedure. Before we begin with the rooting tutorial, we recommend you to follow the below knowledge articles to learn about rooting, custom recoveries and their pros & cons.

1A Beginners Guide to Android Rooting

What is a Custom Recovery?

Warning

Rooting a device and installing custom modules is deemed hazardous and you might end up with a bricked device in worst case scenario. Warranty may be void of your device either temporarily or permanently if you follow the procedure in this tutorial. You alone are responsible for the consequences, we won’t be liable if any damage occurs to your device even though we’re confident that the process works and is tested by many users. However, you can reach us for assistance in the comments section.

Prerequisites

Charge your device above 60% to make sure it doesn’t die in the middle of the process which may be fatal sometimes.

Make a backup of everything on your device so that you can restore the files if something goes wrong. Here’s the usual checklist:

Complete backup of your internal storage

Backup your Contacts, SMS, Call logs, music playlists and photos. Tutorial

Take a complete backup of your apps with data. If you don’t know how, follow our detailed guide on .how to backup apps and data with Helium app

Install proper drivers on your PC. If you haven’t installed them already, you can follow our .detailed USB driver installation guide

Setup ADB and Fastboot files on your PC. If you don’t know how, follow our detailed guide on .how to setup ADB and Fastboot on your PC

Prepare your device:

Enable developer options: Go to your device’s Settings » About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Go to your device’s Settings » Developer options » tick the “USB debugging” check-box (sometimes listed as Android Debugging)

Downloads

Download the latest TWRP recovery for  Gionee X1

 2014 → Require tools and Files-

https://drive.google.com/file/d/1lxp-rnkXZQe5QEZHr9Vvw9vfB77IixAg/view

Step-By-Step Installation Guide

In this guide, first we will unlock the bootloader on your  Gionee X1

 2014 and install a TWRP recovery. Then we will install the SuperSU file to root  Gionee X1

 2014. So, without any ado, let’s start with the guide.

Phase 1: Unlock the Bootloader

Unlocking the bootloader on the  Gionee X1

 2014 would wipe the entire device, so it’s important that you take a thorough backup of your device before proceeding with this guide. Follow our below post on how to unlock bootloader on  Gionee X1

 2014 device.

How to unlock bootloader on  Gionee X1

 2014

Phase 2: Install TWRP Recovery

Connect your
 2014 to PC via USB cable.

Open the command prompt in your PC and type the below command to confirm your device was detected by the PC.adb devices

If everything is good, a message will appear “List of devices attached” along with your device’s serial number. If your device is not visible, then try reconnecting your device again and type the above command.

Now type the below command in the command prompt to enter into fastboot/bootloader mode on your device.adb reboot bootloader

Download the TWRP file from the download section above and rename the downloaded image file to recovery.img for convenience.

Navigate to the path where you’ve placed the TWRP image and open a command prompt in that folder by pressing Shift + Right click in any empty space inside the folder, and select Open command window here from the Windows context menu.

Now type the below command to flash TWRP recovery on your device

.fastboot flash recovery recovery.img

Now you can reboot the device using the below command.fastboot reboot

That’s it. Now you have successfully installed TWRP recovery on your device.

Phase 3: Root your Device

Now all you need to do is to flash the SuperSU binary from the custom recovery to root your device. If you don’t know how, follow the step-by-step from below.

Download the latest SuperSU zip from the downloads section and transfer it to your device’s storage.

Connect your device to PC using a USB cable and enter the following command in the CMD window to reboot your device into recovery mode.adb reboot recovery

Now that you’re in recovery, it’s best to make a nandroid backup of your device. If you’re not sure of the procedure, follow our definitive guide on how to take a nandroid backup on various recoveries.

In the recovery, tap the Install button and select the SuperSU zip to flash it. For more detailed instruction for flashing zips on different recoveries, follow our definitive guide

Once the SuperSU zip is flashed, reboot your device by selecting the Reboot system option from the recovery menu.

To verify if the device is rooted or not, install the below app and open it to verify.


 if the device is rooted or not, install the below app and open it to verify.

My Youtube Channel

https://www.youtube.com/channel/UCPPGx12JXiM1VWVp7540c7Q

Root and Install TWRP Recovery on [Infinix Hot 4] [Eay Guide] - And Rooting

 Install TWRP Recovery on [Infinix Hot 4] [Eay Guide] - And Rooting

Infinix Hot 4 Pro 2014 is one of the most popular budget smartphone launched by Motorola to hold monopoly in several budding markets. The device comes with commending specs and great looks despite the pocket-friendly price tag. However, rooting the device will make it more powerful as user has the ultimate permissions. Moreover, rooting your device will open the portal to awesomeness as you can now enjoy a wide range of apps which are made specially for rooted Android devices.
So, today we will see how to install TWRP and root   Infinix Hot 4 Pro

 2014 with a detailed procedure. Before we begin with the rooting tutorial, we recommend you to follow the below knowledge articles to learn about rooting, custom recoveries and their pros & cons.

1A Beginners Guide to Android Rooting

What is a Custom Recovery?

Warning

Rooting a device and installing custom modules is deemed hazardous and you might end up with a bricked device in worst case scenario. Warranty may be void of your device either temporarily or permanently if you follow the procedure in this tutorial. You alone are responsible for the consequences, we won’t be liable if any damage occurs to your device even though we’re confident that the process works and is tested by many users. However, you can reach us for assistance in the comments section.

Prerequisites

Charge your device above 60% to make sure it doesn’t die in the middle of the process which may be fatal sometimes.

Make a backup of everything on your device so that you can restore the files if something goes wrong. Here’s the usual checklist:

Complete backup of your internal storage

Backup your Contacts, SMS, Call logs, music playlists and photos. Tutorial

Take a complete backup of your apps with data. If you don’t know how, follow our detailed guide on .how to backup apps and data with Helium app

Install proper drivers on your PC. If you haven’t installed them already, you can follow our .detailed USB driver installation guide

Setup ADB and Fastboot files on your PC. If you don’t know how, follow our detailed guide on .how to setup ADB and Fastboot on your PC

Prepare your device:

Enable developer options: Go to your device’s Settings » About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Go to your device’s Settings » Developer options » tick the “USB debugging” check-box (sometimes listed as Android Debugging)

Downloads

Download the latest TWRP recovery for   Infinix Hot 4 Pro

 2014 → Require tools and Files-

https://drive.google.com/file/d/1lxp-rnkXZQe5QEZHr9Vvw9vfB77IixAg/view

Step-By-Step Installation Guide

In this guide, first we will unlock the bootloader on your   Infinix Hot 4 Pro

 2014 and install a TWRP recovery. Then we will install the SuperSU file to root   Infinix Hot 4 Pro

 2014. So, without any ado, let’s start with the guide.

Phase 1: Unlock the Bootloader

Unlocking the bootloader on the   Infinix Hot 4 Pro

 2014 would wipe the entire device, so it’s important that you take a thorough backup of your device before proceeding with this guide. Follow our below post on how to unlock bootloader on   Infinix Hot 4 Pro

 2014 device.

How to unlock bootloader on   Infinix Hot 4 Pro

 2014

Phase 2: Install TWRP Recovery

Connect your   Infinix Hot 4 Pro

 2014 to PC via USB cable.

Open the command prompt in your PC and type the below command to confirm your device was detected by the PC.adb devices

If everything is good, a message will appear “List of devices attached” along with your device’s serial number. If your device is not visible, then try reconnecting your device again and type the above command.

Now type the below command in the command prompt to enter into fastboot/bootloader mode on your device.adb reboot bootloader

Download the TWRP file from the download section above and rename the downloaded image file to recovery.img for convenience.

Navigate to the path where you’ve placed the TWRP image and open a command prompt in that folder by pressing Shift + Right click in any empty space inside the folder, and select Open command window here from the Windows context menu.

Now type the below command to flash TWRP recovery on your device

.fastboot flash recovery recovery.img

Now you can reboot the device using the below command.fastboot reboot

That’s it. Now you have successfully installed TWRP recovery on your device.

Phase 3: Root your Device

Now all you need to do is to flash the SuperSU binary from the custom recovery to root your device. If you don’t know how, follow the step-by-step from below.

Download the latest SuperSU zip from the downloads section and transfer it to your device’s storage.

Connect your device to PC using a USB cable and enter the following command in the CMD window to reboot your device into recovery mode.adb reboot recovery

Now that you’re in recovery, it’s best to make a nandroid backup of your device. If you’re not sure of the procedure, follow our definitive guide on how to take a nandroid backup on various recoveries.

In the recovery, tap the Install button and select the SuperSU zip to flash it. For more detailed instruction for flashing zips on different recoveries, follow our definitive guide

Once the SuperSU zip is flashed, reboot your device by selecting the Reboot system option from the recovery menu.

To verify if the device is rooted or not, install the below app and open it to verify.

My Youtube Channel

https://www.youtube.com/channel/UCPPGx12JXiM1VWVp7540c7Q

How To flash Custom recovery To Oppo A5s install TWRP And Rooting

Custom recovery To Oppo A5s install TWRP And Rooting

Oppo A5s 2014 is one of the most popular budget smartphone launched by Motorola to hold monopoly in several budding markets. The device comes with commending specs and great looks despite the pocket-friendly price tag. However, rooting the device will make it more powerful as user has the ultimate permissions. Moreover, rooting your device will open the portal to awesomeness as you can now enjoy a wide range of apps which are made specially for rooted Android devices. oppo a5s twrp

So, today we will see how to install TWRP and root Oppo A5s 2014 with a detailed procedure. Before we begin with the rooting tutorial, we recommend you to follow the below knowledge articles to learn about rooting, custom recoveries and their pros & cons.

1A Beginners Guide to Android Rooting

What is a Custom Recovery?

Warning

Rooting a device and installing custom modules is deemed hazardous and you might end up with a bricked device in worst case scenario. Warranty may be void of your device either temporarily or permanently if you follow the procedure in this tutorial. You alone are responsible for the consequences, we won’t be liable if any damage occurs to your device even though we’re confident that the process works and is tested by many users. However, you can reach us for assistance in the comments section.

Prerequisites

Charge your device above 60% to make sure it doesn’t die in the middle of the process which may be fatal sometimes.

Make a backup of everything on your device so that you can restore the files if something goes wrong. Here’s the usual checklist:

Complete backup of your internal storage

Backup your Contacts, SMS, Call logs, music playlists and photos. Tutorial

Take a complete backup of your apps with data. If you don’t know how, follow our detailed guide on .how to backup apps and data with Helium app

Install proper drivers on your PC. If you haven’t installed them already, you can follow our .detailed USB driver installation guide

Setup ADB and Fastboot files on your PC. If you don’t know how, follow our detailed guide on .how to setup ADB and Fastboot on your PC

Prepare your device:

Enable developer options: Go to your device’s Settings » About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Go to your device’s Settings » Developer options » tick the “USB debugging” check-box (sometimes listed as Android Debugging)

Downloads

Download the latest TWRP recovery for Oppo A5s 2014 → Require tools and Files-

https://drive.google.com/file/d/1lxp-rnkXZQe5QEZHr9Vvw9vfB77IixAg/view

Step-By-Step Installation Guide


Step-By-Step Installation Guide

In this guide, first we will unlock the bootloader on your Oppo A5s 2014 and install a TWRP recovery. Then we will install the SuperSU file to root Oppo A5s 2014. So, without any ado, let’s start with the guide.

Phase 1: Unlock the Bootloader

Unlocking the bootloader on the Oppo A5s 2014 would wipe the entire device, so it’s important that you take a thorough backup of your device before proceeding with this guide. Follow our below post on how to unlock bootloader on Oppo A5s 2014 device.

How to unlock bootloader on Oppo A5s 2014

Phase 2: Install TWRP Recovery

Connect your Oppo A5s 2014 to PC via USB cable.

Open the command prompt in your PC and type the below command to confirm your device was detected by the PC.adb devices

If everything is good, a message will appear “List of devices attached” along with your device’s serial number. If your device is not visible, then try reconnecting your device again and type the above command.

Now type the below command in the command prompt to enter into fastboot/bootloader mode on your device.adb reboot bootloader

Download the TWRP file from the download section above and rename the downloaded image file to recovery.img for convenience.

Navigate to the path where you’ve placed the TWRP image and open a command prompt in that folder by pressing Shift + Right click in any empty space inside the folder, and select Open command window here from the Windows context menu.

Now type the below command to flash TWRP recovery on your device

.fastboot flash recovery recovery.img

Now you can reboot the device using the below command.fastboot reboot

That’s it. Now you have successfully installed TWRP recovery on your device.

Phase 3: Root your Device

Now all you need to do is to flash the SuperSU binary from the custom recovery to root your device. If you don’t know how, follow the step-by-step from below.

Download the latest SuperSU zip from the downloads section and transfer it to your device’s storage.

Connect your device to PC using a USB cable and enter the following command in the CMD window to reboot your device into recovery mode.adb reboot recovery

Now that you’re in recovery, it’s best to make a nandroid backup of your device. If you’re not sure of the procedure, follow our definitive guide on how to take a nandroid backup on various recoveries.

In the recovery, tap the Install button and select the SuperSU zip to flash it. For more detailed instruction for flashing zips on different recoveries, follow our definitive guide

Once the SuperSU zip is flashed, reboot your device by selecting the Reboot system option from the recovery menu.

To verify if the device is rooted or not, install the below app and open it to verify.

My Youtube Channel

https://www.youtube.com/channel/UCPPGx12JXiM1VWVp7540c7Q

How To for Redmi Go And Twrp recovery 3.2.1 And Rooting

Redmi Go 2014 is one of the most popular budget smartphone launched by Motorola to hold monopoly in several budding markets. The device comes with commending specs and great looks despite the pocket-friendly price tag. However, rooting the device will make it more powerful as user has the ultimate permissions. Moreover, rooting your device will open the portal to awesomeness as you can now enjoy a wide range of apps which are made specially for rooted Android devices. redmi go

So, today we will see how to install TWRP and root Redmi Go 2014 with a detailed procedure. Before we begin with the rooting tutorial, we recommend you to follow the below knowledge articles to learn about rooting, custom recoveries and their pros & cons.

1A Beginners Guide to Android Rooting

What is a Custom Recovery?

Warning

Rooting a device and installing custom modules is deemed hazardous and you might end up with a bricked device in worst case scenario. Warranty may be void of your device either temporarily or permanently if you follow the procedure in this tutorial. You alone are responsible for the consequences, we won’t be liable if any damage occurs to your device even though we’re confident that the process works and is tested by many users. However, you can reach us for assistance in the comments section.

Prerequisites

Charge your device above 60% to make sure it doesn’t die in the middle of the process which may be fatal sometimes.

Make a backup of everything on your device so that you can restore the files if something goes wrong. Here’s the usual checklist:

Complete backup of your internal storage

Backup your Contacts, SMS, Call logs, music playlists and photos. Tutorial

Take a complete backup of your apps with data. If you don’t know how, follow our detailed guide on .how to backup apps and data with Helium app

Install proper drivers on your PC. If you haven’t installed them already, you can follow our .detailed USB driver installation guide

Setup ADB and Fastboot files on your PC. If you don’t know how, follow our detailed guide on .how to setup ADB and Fastboot on your PC

Prepare your device:

Enable developer options: Go to your device’s Settings » About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Go to your device’s Settings » Developer options » tick the “USB debugging” check-box (sometimes listed as Android Debugging)

Downloads

Download the latest TWRP recovery for Redmi Go 2014 → Require tools and Files-

Require tools and Files-

https://drive.google.com/file/d/1lxp-rnkXZQe5QEZHr9Vvw9vfB77IixAg/view

Step-By-Step Installation Guide

In this guide, first we will unlock the bootloader on your Redmi Go 2014 and install a TWRP recovery. Then we will install the SuperSU file to root Redmi Go 2014. So, without any ado, let’s start with the guide.

Phase 1: Unlock the Bootloader

Unlocking the bootloader on the Redmi Go 2014 would wipe the entire device, so it’s important that you take a thorough backup of your device before proceeding with this guide. Follow our below post on how to unlock bootloader on Redmi Go 2014 device.

How to unlock bootloader on Redmi Go 2014

Phase 2: Install TWRP Recovery

Connect your Redmi Go 2014 to PC via USB cable.

Open the command prompt in your PC and type the below command to confirm your device was detected by the PC.adb devices

If everything is good, a message will appear “List of devices attached” along with your device’s serial number. If your device is not visible, then try reconnecting your device again and type the above command.

Now type the below command in the command prompt to enter into fastboot/bootloader mode on your device.adb reboot bootloader

Download the TWRP file from the download section above and rename the downloaded image file to recovery.img for convenience.

Navigate to the path where you’ve placed the TWRP image and open a command prompt in that folder by pressing Shift + Right click in any empty space inside the folder, and select Open command window here from the Windows context menu.

Now type the below command to flash TWRP recovery on your device

.fastboot flash recovery recovery.img

Now you can reboot the device using the below command.fastboot reboot

That’s it. Now you have successfully installed TWRP recovery on your device.

Phase 3: Root your Device

Now all you need to do is to flash the SuperSU binary from the custom recovery to root your device. If you don’t know how, follow the step-by-step from below.

Download the latest SuperSU zip from the downloads section and transfer it to your device’s storage.

Connect your device to PC using a USB cable and enter the following command in the CMD window to reboot your device into recovery mode.adb reboot recovery

Now that you’re in recovery, it’s best to make a nandroid backup of your device. If you’re not sure of the procedure, follow our definitive guide on how to take a nandroid backup on various recoveries.

In the recovery, tap the Install button and select the SuperSU zip to flash it. For more detailed instruction for flashing zips on different recoveries, follow our definitive guide

Once the SuperSU zip is flashed, reboot your device by selecting the Reboot system option from the recovery menu.

To verify if the device is rooted or not, install the below app and open it to verify.

My Youtube Channel

https://www.youtube.com/channel/UCPPGx12JXiM1VWVp7540c7Q

Root and Install TWRP Recovery on [Intex Aqua S3] [Easy Guide] - And Rootin

Install TWRP Recovery on [rIntex Aqua S3] [Easy Guide] - And Rootin

Intex Aqua S3 detailed procedure. Before we begin with the rooting tutorial, we recommend you to follow the below knowledge articles to learn about rooting, custom recoveries and their pros & cons.

1A Beginners Guide to Android Rooting

What is a Custom Recovery?

Warning

Rooting a device and installing custom modules is deemed hazardous and you might end up with a bricked device in worst case scenario. Warranty may be void of your device either temporarily or permanently if you follow the procedure in this tutorial. You alone are responsible for the consequences, we won’t be liable if any damage occurs to your device even though we’re confident that the process works and is tested by many users. However, you can reach us for assistance in the comments section.

Prerequisites

Charge your device above 60% to make sure it doesn’t die in the middle of the process which may be fatal sometimes.

Make a backup of everything on your device so that you can restore the files if something goes wrong. Here’s the usual checklist:

Complete backup of your internal storage

Backup your Contacts, SMS, Call logs, music playlists and photos. Tutorial

Take a complete backup of your apps with data. If you don’t know how, follow our detailed guide on .how to backup apps and data with Helium app

Install proper drivers on your PC. If you haven’t installed them already, you can follow our .detailed USB driver installation guide

Setup ADB and Fastboot files on your PC. If you don’t know how, follow our detailed guide on .how to setup ADB and Fastboot on your PC

Prepare your device:

Enable developer options: Go to your device’s Settings » About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Go to your device’s Settings » Developer options » tick the “USB debugging” check-box (sometimes listed as Android Debugging)

Downloads

Download the latest TWRP recovery forIntex Aqua S3 2014 → Require tools and Files-


Download  https://drive.google.com/file/d/1Px75K9rBzx0f8uV0kGY4RIVG6D4ecFXJ/view?usp=drivesdk  


Step-By-Step Installation Guide

In this guide, first we will unlock the bootloader on your Intex Aqua S3 2014 and install a TWRP recovery. Then we will install the SuperSU file to rootIntex Aqua S3 2014. So, without any ado, let’s start with the guide.

Phase 1: Unlock the Bootloader

Unlocking the bootloader on theIntex Aqua S3 2014 would wipe the entire device, so it’s important that you take a thorough backup of your device before proceeding with this guide. Follow our below post on how to unlock bootloader on intex aqua s3 2014 device.

How to unlock bootloader on Intex Aqua S3  2014

Phase 2: Install TWRP Recovery

Connect your Intex Aqua S3  2014 to PC via USB cable.

Open the command prompt in your PC and type the below command to confirm your device was detected by the PC.adb devices

If everything is good, a message will appear “List of devices attached” along with your device’s serial number. If your device is not visible, then try reconnecting your device again and type the above command.

Now type the below command in the command prompt to enter into fastboot/bootloader mode on your device.adb reboot bootloader

Download the TWRP file from the download section above and rename the downloaded image file to recovery.img for convenience.

Navigate to the path where you’ve placed the TWRP image and open a command prompt in that folder by pressing Shift + Right click in any empty space inside the folder, and select Open command window here from the Windows context menu.

Now type the below command to flash TWRP recovery on your device

.fastboot flash recovery recovery.img

Now you can reboot the device using the below command.fastboot reboot

That’s it. Now you have successfully installed TWRP recovery on your device.

Phase 3: Root your Device

Now all you need to do is to flash the SuperSU binary from the custom recovery to root your device. If you don’t know how, follow the step-by-step from below.

Download the latest SuperSU zip from the downloads section and transfer it to your device’s storage.

Connect your device to PC using a USB cable and enter the following command in the CMD window to reboot your device into recovery mode.adb reboot recovery

Now that you’re in recovery, it’s best to make a nandroid backup of your device. If you’re not sure of the procedure, follow our definitive guide on how to take a nandroid backup on various recoveries.

In the recovery, tap the Install button and select the SuperSU zip to flash it. For more detailed instruction for flashing zips on different recoveries, follow our definitive guide

Once the SuperSU zip is flashed, reboot your device by selecting the Reboot system option from the recovery menu.

To verify if the device is rooted or not, install the below app and open it to verify.

My Youtube Channehttps://www.youtube.com/channel/UCPPGx12JXiM1VWVp7540c7Q

How To Install TWRP and Root Lava Z90 on Android Nougat [2020]

Lava Z90 2014 is one of the most popular budget smartphone launched by Motorola to hold monopoly in several budding markets. The device comes with commending specs and great looks despite the pocket-friendly price tag. However, rooting the device will make it more powerful as user has the ultimate permissions. Moreover, rooting your device will open the portal to awesomeness as you can now enjoy a wide range of apps which are made specially for rooted Android devices.

So, today we will see how to install TWRP and root Lava Z90 2014 with a detailed procedure. Before we begin with the rooting tutorial, we recommend you to follow the below knowledge articles to learn about rooting, custom recoveries and their pros & cons.

1A Beginners Guide to Android Rooting

What is a Custom Recovery?

Warning

Rooting a device and installing custom modules is deemed hazardous and you might end up with a bricked device in worst case scenario. Warranty may be void of your device either temporarily or permanently if you follow the procedure in this tutorial. You alone are responsible for the consequences, we won’t be liable if any damage occurs to your device even though we’re confident that the process works and is tested by many users. However, you can reach us for assistance in the comments section.

Prerequisites

Charge your device above 60% to make sure it doesn’t die in the middle of the process which may be fatal sometimes.

Make a backup of everything on your device so that you can restore the files if something goes wrong. Here’s the usual checklist:

Complete backup of your internal storage

Backup your Contacts, SMS, Call logs, music playlists and photos. Tutorial

Take a complete backup of your apps with data. If you don’t know how, follow our detailed guide on .how to backup apps and data with Helium app

Install proper drivers on your PC. If you haven’t installed them already, you can follow our .detailed USB driver installation guide

Setup ADB and Fastboot files on your PC. If you don’t know how, follow our detailed guide on .how to setup ADB and Fastboot on your PC

Prepare your device:

Enable developer options: Go to your device’s Settings » About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.

Enable USB Debugging: Go to your device’s Settings » Developer options » tick the “USB debugging” check-box (sometimes listed as Android Debugging)

Downloads

Download the latest TWRP recovery for Lava Z90 2014 → Require tools and Files-

Download  https://drive.google.com/file/d/1Px75K9rBzx0f8uV0kGY4RIVG6D4ecFXJ/view?usp=drivesdk  

https://drive.google.com/file/d/1lxp-rnkXZQe5QEZHr9Vvw9vfB77IixAg/view


Step-By-Step Installation Guide

In this guide, first we will unlock the bootloader on your Lava Z90 2014 and install a TWRP recovery. Then we will install the SuperSU file to root Lava Z90 2014. So, without any ado, let’s start with the guide.

Phase 1: Unlock the Bootloader

Unlocking the bootloader on the Lava Z90 2014 would wipe the entire device, so it’s important that you take a thorough backup of your device before proceeding with this guide. Follow our below post on how to unlock bootloader on Lava Z90 2014 device.

How to unlock bootloader on Lava Z90 2014

Phase 2: Install TWRP Recovery

Connect your Lava Z90 2014 to PC via USB cable.

Open the command prompt in your PC and type the below command to confirm your device was detected by the PC.adb devices

If everything is good, a message will appear “List of devices attached” along with your device’s serial number. If your device is not visible, then try reconnecting your device again and type the above command.

Now type the below command in the command prompt to enter into fastboot/bootloader mode on your device.adb reboot bootloader

Download the TWRP file from the download section above and rename the downloaded image file to recovery.img for convenience.

Navigate to the path where you’ve placed the TWRP image and open a command prompt in that folder by pressing Shift + Right click in any empty space inside the folder, and select Open command window here from the Windows context menu.

Now type the below command to flash TWRP recovery on your device

.fastboot flash recovery recovery.img

Now you can reboot the device using the below command.fastboot reboot

That’s it. Now you have successfully installed TWRP recovery on your device.

Phase 3: Root your Device

Now all you need to do is to flash the SuperSU binary from the custom recovery to root your device. If you don’t know how, follow the step-by-step from below.

Download the latest SuperSU zip from the downloads section and transfer it to your device’s storage.

Connect your device to PC using a USB cable and enter the following command in the CMD window to reboot your device into recovery mode.adb reboot recovery

Now that you’re in recovery, it’s best to make a nandroid backup of your device. If you’re not sure of the procedure, follow our definitive guide on how to take a nandroid backup on various recoveries.

In the recovery, tap the Install button and select the SuperSU zip to flash it. For more detailed instruction for flashing zips on different recoveries, follow our definitive guide

Once the SuperSU zip is flashed, reboot your device by selecting the Reboot system option from the recovery menu.

To verify if the device is rooted or not, install the below app and open it to verify.

My Youtube Channehttps://www.youtube.com/channel/UCPPGx12JXiM1VWVp7540c7Q

All-in-one ROM porting guide [mediatek] [qualcomm] [For Cross Porting Guide]

=>BUG FIX METHOD {Later in this Guide}<=

All-in-one ROM porting guide [mediatek] [qualcomm] [For Cross Porting Guide]
For Cross Porting Like:

MT6752 etc. to MT6753/MT6735 MT6737
DO REMEMBER TO CHANGE:

System/xbin/mnld

System/mddb

System/etc/firmware/*

System/etc/A pacing

System/etc/spnconf

In System/lib(/64)/HW :- add files
 accordingly to your

CPU or rename them.

BLACK SCREEN AFTER LOGO:

libcam.paramsmgr

BOOT.IMG PORTING:

UNPACK both Base Rom and Port Rom Boot.img

In PORT ROM BOOT.IMG:-

replace the boot.img-kernel

and in ramdisk folder, add these files from Base Boot.img

to Port Boot.img

fstab.mt6735

init.mt6735.rc

init.mt6735.usb.rc

Note:- Name may differ a little according to your CPU

REPACK THE BOOT IMAGE

NOTE:- If you get Wi-Fi And Bluetooth Not Switching ON

or Battery Percentage then replace

init.project.rc

BUG FIXING [MTK]

NOTE: CHANGE LIB FILES FROM BOTH lib & lib64

folders

If you face "This rom is for Coolpad Note 3 Lite and your device

is "K4Note" or something like that, delete the assert lines in

Updater-script

Always change dpi in build.prop according to your rom

Bootloop when porting

/system/lib(/64)/libandroid_runtime.so

/system/lib(/64)/libandroid_servers.so

/system/lib(/64)/libmedia_jni.so

* Repack boot.image (properly)

Radio FM

/system/bin/fmradio

/system/etc/firmware
/mt6620_patch_e3_hdr.bin

/system/etc/firmware
/mt6620_patch_e6_hdr.bin

/system/etc/firmware/WMT*.CFG

/system/lib(/64)/libfmcust.so

/system/lib(/64)/libfmjni.so

Sensors

/system/bin/akmd*

/system/lib/libsensors.so

/system/lib/libms*.so (according to device)

/system/etc/firmware (folder)

/system/bin/servicemanager

/system/bin/sensorservice

/system/bin/msensord

/system/etc/permissions

/android.hardware.sensor.xxxx.xml

FIX Offline charging

* In Boot.img --> sbin/healthd

/system/lib(/64)/Showlogo

/system/bin/Kpoc_charger

Wi-Fi

/system/etc/wifi (folder)

/system/bin/netcfg

/system/bin/dhcpcd

/system/bin/ifconfig

/system/bin/hostap

/system/bin/hostapd

/system/bin/hostapd_bin

/system/bin/pcscd

/system/bin/wlan*

/system/bin/wpa*

/system/lib(/64)/libhardwarelegacy.so

Bluetooth or Wi-Fi not turning On\Off (old)

/system/lib/module/mtk_stp_wmt

Hotspot

/system/bin/netd

* follow Wi-Fi fix also

Camera

** Try one by one

/system/lib(/64)/libcameracustom.so

/system/lib(/64)/libcameraservice.so

/system/lib(/64)/camalgo

/system/etc/media_profiles.xml

/system/lib(/64)/libcamera.so

/system/lib(/64)/liboemcamera.so

/system/lib(/64)/hw/camera.default.so

/system/lib(/64)/libcamera_client.so

/system/lib(/64)/libcameraprofile.so

/system/lib(/64)/libmhal.so

/system/lib(/64)/libmhalcontent.so

/system/lib(/64)/libmhaldrv.so

/system/lib(/64)/libmhalmdp.so

/system/lib(/64)/libmhalpipe.so

/system/lib(/64)/libmhalscenario.so

/system/lib(/64)/libmhalutility.so

/system/etc/permission

/android.hardware.camera*.xml

Other cam files if any
Try one by one

CamCorder/HwDecoder

/system/lib/libOmx*.so

/system/etc/media_codecs.xml

Green/pink Camera or video

/system/lib(/64)/libdpframework.so

SD card/Memory

In boot.img => mt67**.fstab

/system/bin/vold

/system/bin/pq

/system/bin/sdcard

WhatsApp Media Fix

/system/bin/media

/system/bin/mediaserver

/system/bin/netd

/system/bin/service

/system/bin/servicemanager

/system/bin/surfaceflinger
GPS

/system/xbin/libmnlp

/system/etc/gps.conf

Touch Screen (Haptic)

/system/usr (Folder)

/system/usr/keylayout/Generic.kl =>fix HomeKey

NFC (experimental)

/system/etc/ nfc files

/system/etc/permissions/ nfc files

/system/lib/libnfc**** (all starting with nfc)


Sim 1/2 (RIL)

/system/etc/Trustzone.bin (accordingly to LP or MM etc of stock rom)


/system/etc/firmware/modem.img

/system/etc/permission/****telephony**.xml (RIL)

* Try these as well (you may suffer Bootloop)

/system/bin/mtkrild

/system/bin/mtkrildm1

/system/bin/stmd

EXPERIMENTAL FIX for ril

/system/lib(/64)/Nvram

/system/lib(/64)/Nvram_sec

/system/lib(/64)/Nvram_platform

/system/lib(/64)/Nvrammagentclient

/system/bin/Gsm***

/system/etc/trustzone.bin

/system/lib(/64)/Libril

/system/lib(/64)/Libc2k***

/system/lib(/64)/Librilmtk

Audio/Sound

/system/lib\libaudio*.so

/system/lib(/64)/libaudiocustomparam

/system/lib(/64)/libaudiopolicymanager

/system/lib(/64)/libaudiopolicyservice

/system/etc/audio_effects.conf

/system/etc/audio_policy**.xml

/system/lib(/64)/soundfx

Sometimes if Sound isn't working fully

/system/lib(/64)/hw/audioxxxxx (audio files)

Bluetooth

/system/etc/Bluetooth (Folder)

/system/etc/permissions/android.hardware.bluetooth.xml

/system/bin/uim*

/system/bin/bluetooth*

/system/lib(/64)/libbluetooth_mtk.so

/system/lib(/64)/libbluetoothem_mtk.so
Ads

/system/etc/hosts --> replace with new files or use tweak.


===>> ADVANCE BUG FIXING

Volte Fixing

Will only work if your Base Rom, Port Rom & Kernel supports

VoLTE

In Boot.img:-

Zimage ( kernel - volte supported )

init.volte.rc

This Should Normally Fix but if it doesn't try:

/system/bin/volte_stack

/system/bin/volte_imcb

/system/bin/volte_ua

/system/lib(/64)/volte_imsm

** In build.prop (Not always required):-

 ro.mtk_volte_support=1

 persist.mtk.volte.enable=1

Fingerprint

[Try one by one] [If any file missing leave it]

Usual way to fix:

/system/etc/permissions

/android.hardware.fingerprint.xml

/system/lib(/64)/libgatekeeper.so

/system/lib(/64)/hw

/gatekeeper.mt6735.so

/system/lib(/64)/hw/libmcgatekeeper.so

/system/lib(/64)/hw/fingerprint.default.so

 (can break FP in some devices)

Advanced (if usual doesn't work) (if any missing, leave that):

/system/bin/fingerprintd

/system/bin/Gx_fpd

/system/bin/tee_deamon

/system/lib(/64)/Fpclient

/system/lib(/64)/Fpalgorithm

/system/lib(/64)/Fphal

/system/lib(/64)/FPservice

IF ROM DOESNT BOOT, TAKE LOG (From ADB)

 adb shell logcat > log.txt

and check what is causing issue


GUIDE FOR SNAPDRAGON

Qualcomm Rom Porting

Porting from same chipset like SD410 to SD410

Use Android Image Kitchen to unpack the base and port

boot.img in BOOT-BASE and BOOT-PORT folder.

Replace the files from the BASE TO PORT:

boot.img-zImage

boot.img-dtb

Then in the BOOT-PORT/ramdisk/ folder compare fstab.qcom

with that of the base i.e. BOOT-BASE
/ramdisk/fstab.qcom

REPACK BOOT.IMG

Replace this Boot.img in port

FOR MORE INFO

Do , have a look at these guides :

Bug Fixing for Snapdragon

NOTE: These Worked For Few Roms In Yu MSM Devices,

Not Sure If Will Work In All.

If you have properly edited the boot.img, then only these

fixes will help you

Compare the PORT FILES FROM BASE FILES:

uneventd.qcom.rc (will fix sensor)

uneventd.rc

Copy and replace the following files from Base to Port to solve the

given issues:

No sound bug

/system/lib(/64)/hw

/audio.primary.msm****.so

/system/lib(/64)/hw

/audio.primary.default.so

Sound working in speaker but not working through

headphones or vice-versa:

/system/etc/mixer_paths.xml (you can also try patching it with the base)

Distorted Outgoing Sound during Phone call or Partial Sound

/system/etc/acdbdata/MTP/

MTP_***.acdb (all files)


Home or any other button not working


/system/usr/keylayout/goodix.kl

/system/usr/keylayout/gpio-keys.kl (important)

/system/usr/keylayout/Generik.kl

Video hw encoding/decoding not working


/system/etc/firmware/venus.*** (all files
starting with ‘venus’

Sensors not working

/system/lib(/64)/hw/sensors.msm****.so

 (or sensors.lsm6db0.so)

/system/lib(64)/libsensorservice.so

Led notification not working


/system/lib(/64)/hw/lights.msm****.so

Vibration not working

/system/lib(/64)/libhardware_legacy.so

FM not working

/system/lib(/64)/qcomfm_jni.so

Wifi not working


/system/lib(/64)/modules/wlan.ko

[Note: In MIUI, wlan.ko is renamed as pronto_wlan.ko and is also kept in

/system/lib/modules/pronto/ folder, so

 you’ve to replace in both the places.]

If wlan.ko file is missing, try replacing these files

/system/lib(/64)/libwcnss_qmi.so

For slow WiFi network and other WiFi related issues

replace

/system/etc/wifi/ -- all files

/system/etc/firmware/wlan/ -- all files

Camera and flash not working


/system/vendor/lib(/64)/:

libactuator_***.so (all files starting with ‘libactuator’)

libchromatix_***.so (all files starting with ‘libchromatix’)

libmmcamera_***.so (all files starting with ‘libmmcamera’)

/system/lib(/64)/

libmm-qcamera.so

libmmcamera_interface.co

/system/lib(64)/hw/:

camera.msm****.so

[Note: If such files are also available in your

BASE/system/vendor/lib64/ then you have to copy those files also to

their respective place in PORT]


Done, now zip em and flash.😱😱😱😱

My Youtube Channel

https://www.youtube.com/channel/UCPPGx12JXiM1VWVp7540c7Q